Name:

 Main Unit of A-860
    Quantity:

1 pcs
    Function:

The main unit of A-860 wheel aligner is an operating platform, consisting of middle cabinet, left cabinet, right cabinet, computer, interface control circuit, ower supply.

    Name:

Probe Rod

    Quantity:

4 pcs
    Function:

CCD sensors transfer the captured pictures and processed data to computer system for advanced processor.

    Name:

Clamp Bracket
    Quantity:

4 pcs
    Function:

Right installation of clamps is very important to the measurement. Please don’t clamp the clamps onto the position which has heavy lead, also you should pay attention to the contact of each grabber tip and rim.Last but not least, please keeping the device from collision to ensure the measuring accuracy.

    Name:

Turn Table

    Quantity:

2 pcs
    Function:

Autoboss wheel aligner has 2 turntables (standard configuration). They are in the front wheel of the hoist. Before the car is driven in, please lock the turntable with the locking pin; After the car is driven in, please release it. Do make sure the front wheel is straight to the centre of the turntable.

    Name:

Steering Wheel Holder

    Quantity:

1 pcs
    Function:

Please fix the Steering Wheel Holder according to the hints on the screen to lock the steering wheel during the test, so the tyres can stay at the required direction.

    Name:

Brake Pedal Depressor
    Quantity:

1 pcs
    Function:

Brake Pedal Depressor is used for locking the brake pedal during test to ensure the vehicle stay in the same way.